Drone with Camera > DJI Drone Footage  > DJI Mavic Pro Picture Settings – No More Soft Footage

DJI Mavic Pro Picture Settings – No More Soft Footage



Ever had too soft Footage with your DJI Mavic Pro? I’m about to show you the perfect Picture Settings to get rid of any soft Footage …

Drones

guru
Comments:
  • Manish Chettri
    May 7, 2022 at 8:39 am

    Sir I need a small help regarding my DJI mavic pro

  • Costrignano Modena
    May 7, 2022 at 8:39 am

    nice, but what about DOF with manual focus? Are you aware that a tighter diaphragm means more DOF? This means that you should be able to force this by, for instance, raising the ISO or lowering shutter speed. or both.

  • jethro opeda
    May 7, 2022 at 8:39 am

    Thank you sir

  • Marcel Tito
    May 7, 2022 at 8:39 am

    Nice video. But today I flew with the waypoint options and had him take 4 pictures, all were out of focus. Do you have a solution for that?

  • Here Reihana
    May 7, 2022 at 8:39 am

    That looks terrible

  • last one
    May 7, 2022 at 8:39 am

    useless you go way too fast for a beginner

  • EastCoastSid
    May 7, 2022 at 8:39 am

    Thank you! great video

  • spinach doctor
    May 7, 2022 at 8:39 am

    thanks mate , great tips for me

  • Drones Of Tomorrow
    May 7, 2022 at 8:39 am

    Liked & Subscribed ! It's all in the setup 🙂

  • Leo Liu
    May 7, 2022 at 8:39 am

    thanks great video big help

  • Byron Christopher
    May 7, 2022 at 8:39 am

    Good video. I will now shoot better video because of this. When I get to Heaven and I'm on gate duty when you arrive, you're getting a pass my friend.

  • LUIS VIRUZ
    May 7, 2022 at 8:39 am

    This is the exactly video I was looking for weeks

  • Alex Saeteurn
    May 7, 2022 at 8:39 am

    This is by far the most informative video I need for sharpness and focus. Thank you so much. I’m using the mavic pro and it was definitely the sharpness setting at -2 and Manuel focus turned on that I did not know

  • Amy Quimby
    May 7, 2022 at 8:39 am

    HUGE help!

  • Anthony A
    May 7, 2022 at 8:39 am

    I've ran a -1 to +3 test on the M2Z and P4PV2.0 and the difference is Amazing. I run +3 all the time but I think under low light it's where it's bad but I'm not 100% sure.

  • Ed Du
    May 7, 2022 at 8:39 am

    Apparently you don’t know a lot about video and drones. The processor in a drone is not powerful compared to let’s say a MacBook Pro or Windows equivalent. So don’t use for things you can do in post production must better and easier. Like sharpening, saturation. Well pretty much every video operation. Shoot in autofocus while flying, so the red lines don’t contribute very much, only consumes battery and processor power. Make the video as flat as possible and do color grading in post. Using a flat profile will preserve the highs and lows much better allowing to grade them in post. An interesting discussion, on a Mavic Pro, is to leave the camera cap on or not. Leave the cap on prevents micro vibrations in the camera, micro vibrations that will influence sharpness negatively on the cost of possible sun flares in the cap. A professional NLE like DavinciResolve 16 Studio can take away a lot of the flares.

  • Herbie
    May 7, 2022 at 8:39 am

    I subscribed just for "plah tee num". 😉

  • Dronus
    May 7, 2022 at 8:39 am

    Thanks for going deeper than most vloggers! What a great help.

  • Aaron Merculief
    May 7, 2022 at 8:39 am

    The nice thing about the 3DR Solo was using a GoPro as a video recorder. Always great footage.

  • Kenneth
    May 7, 2022 at 8:39 am

    Hi, can I know what the red line means? Perfectly in focus or not in focus?

  • THE URBAN ARTIST
    May 7, 2022 at 8:39 am

    Best learning video my man. Thanks

  • Trini Weekes
    May 7, 2022 at 8:39 am

    Great information, I have stated using +1 on my MPP, thank you.

  • Hoistaphillic FPV
    May 7, 2022 at 8:39 am

    "DGI mavic pro Platee-num" XD WTF

  • Telli Filmmaker
    May 7, 2022 at 8:39 am

    great video! I want to make you a question; I am not a drone profesional, I am current videographer and in a past wedding I made some shoots with the mavic pro, but now I am seeing and it looks like a gaussian blur… I use the Log and I think I set the sharpness in -2 because of the nervous of the wedding and because in the configuration of any Canon or Sony videocameras I use to set this in the minimum… I supponse that nothing can be done now… ??

  • Have Drone Will Travel
    May 7, 2022 at 8:39 am

    So with manual focus, wouldn't you have to constantly focus manually as you fly? Seems it would be terribly bothersome. Am I missing something?

  • Gary Bond
    May 7, 2022 at 8:39 am

    Play tee num lol

  • Lumix S1 NP
    May 7, 2022 at 8:39 am

    perfect!

  • Jay C
    May 7, 2022 at 8:39 am

    I've found every video on Mavic Pro settings on YouTube and still get distorted footage and pictures. I was thinking the camera just isn't truly 4k.

  • Cam row drone
    May 7, 2022 at 8:39 am

    👍🏻

  • steve diosdado
    May 7, 2022 at 8:39 am

    This video is extremely well put together. Thank you. You just got another subscriber.

  • Dan
    May 7, 2022 at 8:39 am

    I couldn’t see the difference

  • len allan
    May 7, 2022 at 8:39 am

    how do you adjust contrast and saturation in custom , i can only seem to adjust sharpness

  • Boris Bizjak
    May 7, 2022 at 8:39 am

    From 7:30 one can clearly see more detailed grass with +1 compared to 0. Thanks for the video.

  • Shafivisuals
    May 7, 2022 at 8:39 am

    Very well spent 12 minutes

  • esperanza dekeling
    May 7, 2022 at 8:39 am

    Nice one

  • Brenden Burnham
    May 7, 2022 at 8:39 am

    This is a very good video in not only explaining the difference of sharpness but also showing. Now I know for sure I will be using +1 sharpness and depending on importance of footage will be using neat video to denoise once I purchase it. I already have many corrective and color LUT's so just need the neat video to make the footage really good. Thanks for this I really learned a lot especially about the focus.

  • Menkromsen
    May 7, 2022 at 8:39 am

    Great video! One of the best sharpness tests for the Mavic out there!
    Since "everyone" recommended the +1 sharpness setting, I've been using that a lot. In good lightning that looks quite OK, but if there are a lot of shadows I see a lot of noise! The sharpening is also a bit too strong. So, for everyday footage I think I will use the 0 setting. Can't bother with Neat. For night scenes with max ISO, I guess -1 will do the trick as you mentioned. Thanks!

  • George Costea
    May 7, 2022 at 8:39 am

    To start off I watch too many YouTube videos when I get interested in a new toy. Someone once said to me “to take something complex and explain it in simple terms is to have masted that subject.” Your explanation and quality of production are to be complimented. I recently purchased a product that I’d like to review it in various configurations and decided to go with a DJI drone. One of my biggest concerns is to buy the Air, a now discounted Platinum, or wait for the II. You’ve been a nice cushion while impatiently waiting.

  • Super Burrito Time
    May 7, 2022 at 8:39 am

    Great Video, I was able to learn something!

  • John Kaddouri
    May 7, 2022 at 8:39 am

    Well done!!!

  • A.J. Williams
    May 7, 2022 at 8:39 am

    Can anyone tell me why my mavic pro platinum audio and video skips when I get on facebook live?

  • ck
    May 7, 2022 at 8:39 am

    why my clip get blurry when i upload it on my instagram?

  • The Weekend Filmmaker
    May 7, 2022 at 8:39 am

    Thanks pal!

  • Stormtrooper
    May 7, 2022 at 8:39 am

    what app/program can i use to do a color grade for me as in i take the video from the mavic in d-log? drag it on the computer open an app/program and drop it in and it will do all the color grading for me to make the color pop a auto porgram ? something simple

  • JustusLM
    May 7, 2022 at 8:39 am

    This shows again that the Mavic's noise reduction is still disabled with sharpness +1, and is terrible when it is active.

  • Shadedpolygon 3D Studio
    May 7, 2022 at 8:39 am

    Thanks for this one 👍

  • Ozaer Najim
    May 7, 2022 at 8:39 am

    My images were blurry on a sunny day and I changed the settings to 1080p 23fps, thinking it wouldnt matter …but my images were blurry. Do you suggest changing it sharpness -1? I think the default is is set 0.

  • journeyisseperate
    May 7, 2022 at 8:39 am

    Excellent video. The side-by-side comparisons are particularly revealing.

Leave a reply